How To Update Software; Available Blanking Plates - Bay-Tek CONNECT 4 HOOPS Service Manual

HOW TO UPDATE SOFTWARE

New Software Installation:
The hard drive contains all the information about the game: Credits per play, ticket pattern, etc.
Be sure to check this information after finishing installing new software.
Turn off game by flipping the power switch on the power strip.
Press tab on far side of hard drive
and gentle remove from motherboard.
Unplug power supply jumper connector
and remove old hard drive from unit.
Install new hard drive by gently pushing straight onto motherboard until it "clicks".
Turn the game back on by flipping the power switch on the power strip.
Note: The I/O boards will automatically be updated by the motherboard software.
BLANKING PLATES AVAILABLE
A5PL4200
A5PL9998
A5PL8900
A5PL9995
Locate hard drive on motherboard.
DBA Plate used for Upstacker Bill Acceptor
Plate used instead of Coin Mechanisms
Plate used for Bill Validator
Plate used instead of ticket dispenser
53
AAMB10E-HD
Motherboard
Note: Later games may have
different colored sockets.
The connections are the same.