Bay-Tek Big Bass Wheel Service Manual page 31

TROUBLESHOOTING GUIDE
Problem
Bobber Red LED lights are
not working.
Bobber LED white lights
are not working.
Left or Right Wheel White
LED's not
working.
Troubleshooting Chart
Probable Cause
Jackpot Enabled in menu
LED strip faulty
Faulty Cable
LED strip faulty
Faulty Cable. 12 Volts DC
to lights
LED strip faulty
Faulty Cable
Faulty I/O Aux Board
31
Disable Jackpot in menu. The Red LED's will
not flash without the AAKIT-BBW-CHASE if
Jackpot Sign is used.
Remove bobber and examine LED strip.
(AACB1905)
Check cables from LED strip to I/O Aux Board
(AACE1625, AABD1055, AACE1625, AAC-
B1900AMP)
Remove bobber and examine LED strip.
(AALS1700)
Check cables from LED strip to I/O Aux Board
(AALS1700, AACE1634, AACB1900AMP)
Slide open front windshield and examine LED
strip. Plug the LED strip into the cable from the
other side.
Replace if needed. (AALS1701)
Check cables from LED strip to Power Supply.
(AALS1701, AACE1620, AACE1625)
Replace I/O Aux Board. (Part # AAC-
B1900AMP)
Remedy