Top 7 Things You Do Not Know; How To Replace Software - Bay-Tek Big Bass Wheel Service Manual

TOP 7 THINGS YOU DO NOT KNOW ABOUT BIG BASS WHEEL
1.) If game goes into menu by itself - scrolls through it by itself. The solenoid is bad.
2.) If pays out 5 or 6 tickets every time, then enter the secret menu by holding the menu button down for
30 seconds, and turn off "show settings"
3.) If game plays fine, but the monitor has no picture - then the monitor is faulty.
4.) If game pays out tickets everywhere except bonus spots - then enter printer menu and disable printer.
5.) If game volume is too loud or soft and can not be adjusted enough in the menu - then use keyboard/
mouse to adjust master volume in the program.
6.) To clear a Motor Watchdog Error, you must set to "Motor Assist" , then power game off and back on.
7.) "Door Open" message might have nothing to do with the door switches. If you can not enter the menu
by holding the menu button for 5 seconds - then the communication cable between the motherboard
and I/O Aux Board is faulty.
HOW TO UPDATE SOFTWARE
The software is programmed onto a USB thumb drive dongle .
It pushes into any of the USB sockets on the motherboard.
To Change Software:
Power game Off.
Remove USB stick
Insert new USB
Power game On.
Make sure to check all you menu settings for your specific game
settings as credits per game, ticket pattern, volume levels,
etc.
43
AAMB9A-FHD
Motherboard