Bay-Tek Big Bass Wheel Service Manual page 9

BIG BASS WHEEL GAME SETUP
USE THE BROWN 1 1/4" FLAT HEAD SCREWS TO
SECURE THE FISH HEAD TO THE CABINET AT THE
SIDES AND BACK.
YOUR GAME WAS SHIPPED WITHOUT THE HANDLE ATTACHED:
REMOVE THE MOUNTING BOLT AND LOCKNUT FROM THE END OF THE
INSERT THE HANDLE INTO THE FRONT CONTROL BRACKET.
FROM INSIDE THE GAME, INSERT THE BOLT THROUGH THE BRACKET
ARM AND HANDLE. SECURE USING THE LOCKNUT.
THE FACTORY REQUIRES THAT BOTH GUARDS ARE FASTENED TO THE
GAME AT ALL TIMES. THE SAFETY GUARDS HELP PROTECT AGAINST
POSSIBLE INJURY. THE FACTORY ALSO REQUIRES THESE GUARDS TO BE
INSPECTED WEEKLY BY AUTHORIZED PERSONNEL.
EVERY WEEK CHECK THE BOLTS AND LOCKNUTS TO ENSURE TIGHTNESS
ON BOTH SIDES OF THE CABINET THERE ARE A TOTAL OF 8 HOLES USED
TO MOUNT THE SAFETY SIDE GUARDS.
PLACE THE BOLT THROUGH THE HOLE IN THE GUARD,
ON THE INSIDE OF THE CABINET ADD ONE FLAT WASHER, ONE SPLIT
WASHER AND ONE LOCKNUT TO SECURE THE BOLT, SEE DIAGRAM.
IF THE FRONT WINDOW IS OPEN, SLIDE IT CLOSED.
RETRIEVE THE HANDLE,
HANDLE.
SAFETY SIDE GUARDS:
AND INTO THE CABINET.
LATCH THE WINDOW SECURE.
YOUR GAME IS READY FOR PLAY.
9