Selecting Continuous Mode Configure Settings - Branson 900M Series Manual

2. Selecting Continuous Mode Configure Settings
This sub-menu allows you to configure your 900M/Continuous Mode welding system.
Settings
Choices
Function
Language =
ENGLISH (D)
DEUTSCH
FRANCAIS
CASTELLANO
ITALIANO
Select the language in which you wish
information to be displayed.
UNITS = USCS (D)
Select standard American units to measure and
display all settings and date.
METRIC / SI
Select metric units to measure and display all
settings and date.
WELD SCALE
=
lx (D)
Select the multiplier displayed on the
POWER
bargraph during weld time and READY state.
Display actual power.
2X
Display twice actual power.
3X
Display three times actual power.
TEST SCALE =
2X (D)
Select the multiplier displayed on the
POWER
bargraph during TEST mode only.
Display twice actual power.
3X
Display three times actual power.
1X
Display actual power.
DIGITAL
FILTER
ON (D)
Average the power data before being sent to
the ECI.
OFF
Do not average the power data before being
sent to the ECI.
ALARMS =
NOT LATCHED
(D)
Do not latch alarms.
LATCHED
Latch alarms.
Note: Alarms are described in Appendix G, Messages.
900M WS Operator's
4-47
Operation