How To Store Settings - Branson 900M Series Manual

2. Changing other settings
To change choices within the sub-menus, for instance OFF / ON, press the single
UP
and
DOWN
arrow keys to move forwards or backwards through the choices and make your
selections.
4.4.3 How to store settings
When you have set all the required settings, press sgruP to return to
READY
state. The
selected settings are stored during the next weld cycle or by pressing either
PALM
BurroN.
..:› Note: When reentering the Setup Menu, if you have not turned the power off, you will
enter at the sub-menu from which you last exited. If you have turned the power
off, you will always reenter the Setup Menu at sub-menu 1.
Operation
4-28
900M P/S Operator's