Window Teach Offset; Adjust Switch Point One - Banner LTF Series Instruction Manual

S P
ENSOR ROGRAMMING
Navigate: MENU > D_OUT > TchMid > TchMdPt
Remote Input: Available
Button Instructions
1) Present the target.
Present the target.
2) Access the TEACH midpoint mode and TEACH the sensor.
Navigate: MENU > D_OUT > TchMid > TchMdPt
Remote Input Instructions
1) Access the TEACH mode.
Single-pulse the remote input.
2) Present the target.
Present the target.
3) TEACH the sensor.
Five-pulse the remote input.

3.6.2.3. Window TEACH Offset

Use the D_OUT > TchMid > Offset menu to set an offset from the taught distance used during a Midpoint TEACH. By default, the value is 0 mm
because the window is centered around the taught distance. A positive offset value always shifts the window towards the sensor.

3.6.3. Adjust Switch Point One

The AdjSPt1 option manually adjusts the value of the switch point one threshold for the Discrete Output when the sensor is in Window mode.
The value is adjustable within the sensor's range. It is required to be maintain the minimum window size between switch points. This menu is not
available when the sensor is in Switch, Alarm, or Health mode.
Navigate: MENU > D_OUT > AdjSPt1
Remote Input: Not available
19
Action
Action
Action
Action
Action
T T
T T
© Banner Engineering Corp. www.bannerengineering.com
The target's analog output measurement and distance
measurement value display.
"TchMdPt Teaching" displays while the sensor is
being taught.
TEACH Accepted
The new value is shown on the second line of the
display and flashes before it is saved and the sensor
returns to "TchMid TchMdPt".
TEACH Not Accepted
"FAIL" and a warning message display, and the
sensor returns to "TchMid TchMdPt".
"RMT TCH" and the current measurement value
T
display.
"RMT TCH" and the target's measurement value
display.
"TchMdpt Teaching" displays while the sensor is
being taught.
TEACH Accepted
The new value displays on the second line of the
T
T T
display, flashes, and the sensor returns to Run mode.
TEACH Not Accepted
T
T
"FAIL" and a warning message display, the sensor
returns to step 2, and "RMT TCH" displays.
Result
Result
Result
Result
Result