Table of Contents
Advertisement
A
R
TEACH P
DDITIONAL
EMOTE
When the Discrete Output is set to Switch Mode, the SPt TEACH is executed with SPtRef=Custom and Offset=0 mm.
1)
Access the TEACH mode.
Single-pulse the remote input.
2)
Present the target.
Present the midpoint (switch point) target.
3)
TEACH the sensor.
Six-pulse the remote input.
35
ROCEDURES
Action
Action
Action
T
T
T
T
T
© Banner Engineering Corp. www.bannerengineering.com
"RMT TCH" and the current measurement value
T
display.
"RMT TCH"and the target's measurement value
display.
"TchA&D Teaching" displays while the sensor is
being taught.
TEACH Accepted
The new value displays on the second line of the
T
T
T
display, flashes, and the sensor returns to Run mode.
TEACH Not Accepted
T
T
T
"FAIL" flashes, the sensor returns to step 2, and "RMT
TCH" displays.
Result
Result
Result
Advertisement
Table of Contents
