Speed; Trigger - Banner LTF Series Instruction Manual

MENU MEASURE
Go Back to Parent Menu
Press and Hold to Go Back

3.8.1. Speed

The Speed option sets the speed at which the measurement is calculated. This process uses averaging in the digital processing of the signal to
calculate the measurement. A slower speed increases the response time of the sensor but improves the repeatability. Refer to the repeatability
specifications for each speed.
Navigate: MENU > MEASURE > Speed
Remote Input: Not available
Default: Medium
Speed
Fast 1.5 ms
Standard 8 ms
Medium 32 ms
Slow 256 ms
* Response time triples when using Master/Slave mode.

3.8.2. Trigger

The Trigger option sets the advanced measurement that is calculated when a trigger event is detected on the remote input. The analog output
updates with the new advanced measurement on each trigger event. To use these Trigger options, the sensor Input Type option must be set to
Trigger; see Input Type.
Navigate: MENU > MEASURE > Trigger
Remote Input: Not available
Select Menu Item
or
Press to Save Setting
or
to Run Mode
Response Time *
Figure 17: Lateral Entry Example
© Banner Engineering Corp. www.bannerengineering.com
MEASURE Speed
Speed Fast
Speed Standard
Speed Medium
Speed Slow
MEASURE Trigger Trigger Sample
Trigger Average
Trigger Max
Trigger Min
Trigger Range
Trigger TrackMax
Trigger TrackMin
Figure 16: Measure Menu Map
5.5 ms
16 ms
48 ms
288 ms
S P
ENSOR ROGRAMMING
Lateral Entry
26