Table of Contents
Advertisement
S
P
ENSOR
ROGRAMMING
Remote Input: Not available
Default: Normal
Figure 25: Normal Display Orientation
3.9.4. Sleep
The Sleep option sets when the display is put to sleep. Four timing options are available: 1, 5, 15, or 60 minutes. Sleep mode is disabled by
default. Sleep occurs in Run mode and any menu. To wake the sensor and return to the last viewed mode or menu, press any button.
Navigate: MENU > DISPLAY > Sleep
Remote Input: Not available
Default: Disabled
3.10. Information Menu (INFO)
Use this menu to view model, part number (P/N), serial number (S/N), and firmware version (Version) information. Select one of these options
to view specific information for your sensor. This information is read-only.
Navigate: MENU > INFO
Remote Input: Not available
MENU INFO
Select Menu Item
Press to Save Setting
Go Back to Parent Menu
Press and Hold to Go Back
to Run Mode
3.11. Reset Menu (RESET)
Use this menu to restore the sensor to the factory default settings.
Navigate: MENU > RESET. Select Yes to apply the factory defaults; select No to return to the Reset option without changing any sensor settings.
Remote Input: Eight-pulse the remote input
31
INFO Model
INFO P/N
INFO S/N
INFO Version
or
or
Figure 27: Information Menu Map
© Banner Engineering Corp. www.bannerengineering.com
Figure 26: Inverted Display Orientation
Model LTF12I
P/N 94849
S/N F..S..P..D..
Version 1.0.0
Advertisement
Table of Contents
