Arai Helmet TOUR-X5 Instructions For Use Manual page 4

2
English
CONTENTS
TO OPEN/CLOSE SHIELD ..........................................................................4
TO REMOVE/REPLACE BREATH DEFLECTOR .............................................6
TO ADJUST PEAK ANGLE ..........................................................................6
TO OPERATE MOUTHVENT........................................................................8
TO OPERATE TOP VENTS ..........................................................................8
TO OPERATE AIRFLOW SPOILER ...........................................................10
TO REMOVE/REPLACE PEAK/FACE SHIELD..............................................10
TO REMOVE/REPLACE BASE PLATES ......................................................16
TO REMOVE/REPLACE CHEEK PADS .......................................................16
TO REMOVE/REPLACE COMFORT LINING ................................................22
TO REMOVE/REPLACE CHINSTRAP COVERS ...........................................24
TO REMOVE/REPLACE NECKROLL ..........................................................30
CAUTION: The peak supplied with your helmet is not suitable for high-
speed use. At such speeds air catching a side or main surface of the
peak may cause difficulty in returning the head to a forward and/or level
position, or may obstruct your vision. You should practice experiencing
this effect starting at low speeds and gradually increasing speeds so
that you will know what to expect and determine when the peak should
be removed for higher speed riding.