Download Print this page

Arai Helmet TOUR-X5 Instructions For Use Manual page 30

Advertisement

Steel chinstrap anchor
Fixation en acier
Stahl-Kinnriemen-Anker
28
English
Angle the yellow plastic chinstrap anchor at about 45 degrees to the steel
6
chinstrap anchor (6).
Yellow plastic chinstrap anchor
Fixation de jugulaire en plastique jaune
Gelber Kunststoff-Kinnriemen-Anker
Push the two tabs on the yellow plastic chinstrap anchor into the two holes
7
in the steel chinstrap anchor (7).
Press the yellow plastic chinstrap anchor until it is securely in place against
8
the steel chinstrap anchor (8).
To replace the right chinstrap cover ( long side ), ensure the cap side of the
9
chinstrap end snap (Arai logo impressed) on the chinstrap and the leatherette
side of the chinstrap cover both face outward (9).
Repeat the procedure as you did for the other side of the chinstrap cover.

Advertisement

loading