Replacing The Image Drum - Oki COREFIDO B822dn User Manual

Replacing the image drum

This section explains how to only replace the image drum with a new one, and continue using the existing toner
cartridge.
Refer to "
Replacing the image drum and the toner cartridge
toner cartridge with new ones.
 If you attach the existing toner cartridge to a new image drum, the remaining amount of the toner cartridge may not be
displayed correctly. In addition, "Toner low." or "Toner Empty. Replace with a new toner cartridge." may be displayed
after the replacement.
 Please use genuine OKI genuine consumables for optimum performance.
 Failures caused by using non-genuine consumables may void the warranty or maintenance contract. (The use of
non-genuine consumables will not necessarily cause failures, but please fully take notice of such usage.)
1
Prepare a new image drum.
2
Press the front cover open button on the side of this machine and open the front cover toward
you.
3
Make sure that the blue lever on the left side of the toner cartridge is aligned with the lock mark.
Do not touch the blue lever. The image drum cannot be removed while the lever is being moved.
4
Hold the toner cartridge, push it up slightly, and then pull it out toward you. Remove the toner
cartridge with the image drum attached.
(P.320)" if you want to replace both the image drum and
- 315 -
Maintenance