Printing Ps Errors; Maximizing The Printable Area - Oki COREFIDO B822dn User Manual

5
Click [Advanced].
6
Check [Job Spool], and click [OK].
7
Specify other settings as necessary, and click [OK].
8
Click [Print] in the [Print] screen.

Printing PS errors

You can print the error content when a PostScript error occurs.
 This function is not available on B822.
 This function is not applicable to the Windows PCL printer driver or macOS.
For the Windows PS printer driver
1
Open the file to be printed.
2
Select [Print] from the [File] menu.
3
Click [Preferences].
4
Click [Advanced] in the [Layout] tab.
5
Click [Send PostScript Error Handler] under [PostScript Options], and select [Yes] from the
drop-down list.
6
Click [OK] until the print setup screen is closed.
7
Click [Print] in the [Print] screen.

Maximizing the printable area

You can maximize the printable area by reducing the top, bottom, left and right margins to 2.0 mm for the paper
to print.
 This function is not available to the Windows PS printer driver or macOS.
 Print quality is not guaranteed for the area of up to 4.23 mm from the paper edge.
If the printout is not complete, you may take the following actions to improve such situations.
 Select the [Job Options] tab - [Advanced] - [Print Position Adjust] - [On] in the printer driver, and click
[Options] to correct the print position.
 Select the [Job Options] tab - [Scale] - [Independent Scale] in the printer driver before printing.
 Correct the print position on the operator panel. Please see "
for details.
For the Windows PCL printer driver
1
Open the file to be printed.
2
Select [Print] from the [File] menu.
3
Click [Preferences].
4
Select the [Job Options] tab.
5
Click [Advanced].
Correcting the print position of the tray
- 199 -
Printing from a PC
(P.201)"