Printing By Specifying The Font To Use - Oki COREFIDO B822dn User Manual

7
Specify other settings as necessary, and click [OK].
8
Click [Print] in the [Print] screen.
For macOS PS printer driver
1
Open the file to be printed.
2
Select [Print] from the [File] menu.
3
Select the [Printer Features] panel.
4
Check [Adjust ultra fine lines].
5
Specify other settings as necessary, and click [Print].
 If there is no detail settings displayed in the [Print] screen, click [Show Details] at the bottom of the screen.

Printing by specifying the font to use

Using printer-specific fonts
 This function is not available to the Windows PCL printer driver when [Print Mode] is set to [Image], nor to a macOS.
 The printer fonts may not be reproduced as the TrueType font design displayed on screen.
 This function is not applicable to some applications.
 If you are using B822, refer to the PCL printer driver section.
For Windows PCL printer driver
1
Open the file to be printed.
2
Select [Print] from the [File] menu.
3
Click [Preferences].
4
Select the [Job Options] tab.
5
Select [PCL] in [Print Mode].
6
Select the [Extend] tab.
7
Click [Fonts].
8
Check [Font Substitution] in [TrueType Font Output Type].
9
Specify the printer font to be used instead of the TrueType font in [Font Substitution Table].
10
Click [OK].
11
Specify other settings as necessary, and click [OK].
12
Click [Print] in the [Print] screen.
For the Windows PS printer driver
1
Open "Printers Folder".
How to open the printer folder(P.145)
- 186 -
Printing from a PC