Oki COREFIDO B822dn User Manual page 48

To set the IP address manually, press ▼ to select [Manual] and then press «OK», and check that [*] is
displayed to the left of the selected value.
Go to Step 7.
To obtain an IP address automatically, check that [Auto] is selected and [*] is displayed to the left of the
selected value, and then press «BACK».
Go to Step 14.
7
Press «BACK», then press ▼ to select [IPv4 Address] on the [Wired(LAN1) Setup] screen, and
finally press «OK».
8
Since the first digit of the IP address is selected, press ▲ or ▼ to select the value to be set and
then press «OK».
When the cursor moves to the next digit, follow the same procedure to set the value.
9
After all the values have been input, the cursor will return to the first digit. Check that [*] is
displayed to the left of the set value, and then press «BACK».
10
Press ▼ to select [Subnet Mask], and press «OK».
Preparing and connecting this machine to your PC
- 48 -