Printing By Automatically Selecting A Tray For The Specified Paper - Oki COREFIDO B822dn User Manual

Printing by automatically selecting a tray for the specified paper

The tray (i.e. the paper tray (Tray1/2/3/4), or the MP Tray) matching the paper size and type that are set in the
printer driver will be selected automatically for printing. Trays are selected according to the setting of [Tray
Sequence].
 If you are using B822, refer to the PCL printer driver section.
 Be sure to set the paper size and paper weight for the paper pay and MP tray on the operator panel.
Loading paper(P.82)
When using the MP tray
By default, the tray usage is set to [When Mismatching] for the MP tray. In this case, the MP tray is not subject
to Auto Tray Change.
To set the MP tray as a target for auto tray switch, use the following settings.
1
Check that "Ready To Print" appears on the display.
If the machine is in the power saving mode, press «OK» to restore.
2
Press the scroll button ▼ on the operator panel several times to select [Menus], and press
«OK».
3
Check that [Tray Configuration] is selected, and press «OK».
4
Check that [MPTray Config] is selected, and then press «OK».
5
Press ▲ to select [Tray Usage], and then press «OK».
6
Press ▲ to select [Normal Tray], and then press «OK».
7
Press «CANCEL» to return to the standby screen.
For Windows PCL printer driver
1
Open the file to be printed.
2
Select [Print] from the [File] menu.
3
Click [Preferences].
4
Select [Auto] in [Source] of the [Setup] tab.
5
Specify other settings as necessary, and click [OK].
6
Click [Print] in the [Print] screen.
For the Windows PS printer driver
1
Open the file to be printed.
2
Select [Print] from the [File] menu.
3
Click [Preferences].
4
Select [Auto Select] in [Paper Source] of the [Paper/Quality] tab.
5
Specify other settings as necessary, and click [OK].
6
Click [Print] in the [Print] screen.
- 193 -
Printing from a PC