Oki COREFIDO B822dn User Manual page 373

Message
Can not connect to the wireless
access point
Timeout
Press OK Button
Press Help for details
Can not connect to the wireless
access point
Overlap
Press OK Button
Press Help for details
Can not connect to the wireless
access point
The security selected is not
supported by WPS
Press OK Button
Press Help for details
Can not connect to the wireless
access point
Communication error
Press OK Button
Press Help for details
Press OK Button for Restoration
Receiving Data Timeout
Press Help for details
Firmware Update Error
Please try again
If network doesn't work, please try
firmware update over USB
Install Paper
Tray Name
Media Size
Press Help for details
Install Paper Cassette
Tray Name
Press Help for details
Remove Paper
Output Tray
Press Help for details
The toner cartridge has reached
the end of its life
Waste Toner Full
Press Help for details
Install Toner
Press Help for details
The optimal toner cartridge for this
printer is not installed
Press Help for details
The toner cartridge is not installed
Press Help for details
Error code
526 Could not connect to the wireless LAN access point. Could not
connect to the wireless access point within the specified time of
WPS.
Check that the wireless access point is turned on, and then run
WPS again.
527 Could not connect to the wireless LAN access point. It is
possible that you could not connect to the wireless access point
because another handset is running WPS. Wait for a while and
then run WPS again.
528 Could not connect to the wireless LAN access point. The
wireless access point may not comply with the WPS standard.
If you still cannot connect even after running WPS again,
manually set and connect.
529 Could not connect to the wireless LAN access point. There may
be something wrong with the Wireless LAN module.
If you still cannot connect even after restarting the device and
running WPS again, contact our Customer Support Center or
your dealer.
519 The data could not be received within the correct time.
When the printing does not work as expected, set a longer time
in [Menus] - [System Adjust] - [Timeout Injob].
- Firmware update has failed.
Please update the firmware again. For details, see
update(P.365)".
490, 491, 492, 493, There is no paper in the indicated tray.
494 Please load paper.
490: MP tray; 491: Tray 1; 492: Tray 2; 493: Tray 3; 494: Tray 4
430, 440, 431, 441, The printing has stopped because the displayed paper cassette
432, 442, 433 is not properly installed.
Pull the paper cassette out, and insert it back.
430, 440: Tray 1; 431, 441: Tray 2; 432, 442: Tray 3; 433: Tray4
480 The output tray is full.
Remove the printed paper.
417 The toner cartridge is approaching the end of its life.
Replace the toner cartridge with a new one.
413 The toner cartridge is empty.
You can continue using the machine for a while by opening and
closing the front cover, but the image drum may be damaged.
Therefore, please replace the toner cartridge with a new one
promptly. To replace the toner cartridge, see
cartridges(P.312)".
535, 557, 617, 623 The toner cartridge is not optimal for this machine. It is
recommended to use the toner cartridge that is optimal for this
machine.
613 The toner cartridge is not installed.
Install the toner cartridge. To install the toner cartridge, see
"Replacing toner
- 373 -
Description
cartridges(P.312)".
Troubleshooting
"Firmware
"Replacing toner