Parts identification of the operator panel
No.
Display
1
«HELP» button
2
«BACK» button
3
«CANCEL» button
4
«OK» button
5
Scrolls buttons ▲▼
6
POWER SAVE lamp
7
ATTENTION lamp
8
ONLINE lamp
9
Name
Displays the state of this machine and operation instructions.
There are two types of standby screens: "Show Remaining Toner" and
"Show Tray Information".
The factory default setting is "Show Remaining Toner".
Displays the help screen. To close the screen, press the «HELP» button
again, or press the «BACK» or «CANCEL» button.
Goes back to the previous screen.
Cancels the current printing. Goes back to the standby screen when the
menu is displayed.
Confirms the highlighted item.
The machine wakes up when it is in the sleep mode.
Used to select a menu or scroll the screen display.It can be used to input
numbers in the numerical input screen.
Lights green in the power save mode, and flashes green in the sleep
mode.
Indicates the state of this machine.
Lights off in the normal state.
On: Indicates that a minor error has occurred.
Flashing: Indicates that a major error has occurred.
Lights on in green when the machine is online, and lights off when the
machine offline.
Changing settings from the operator panel
Function
- 100 -