Oki COREFIDO B822dn User Manual page 88

2
When the [Tray1 Config] screen is displayed, press «BACK».
3
Set the paper size dial to fit the paper size.
: Select it when you have loaded paper of a standard size not available on the paper size dial.
4
If you are using B842dn, check the size of the paper to be loaded and the position of the paper
feed adjuster (x2) according to the table below.
If you are using B822dn, go to Step 6.
If the position of the paper feed adjuster is incorrect, the paper may not be fed or multiple sheets of paper may be
fed at a time.
If you are using B822dn/B842dn, to load paper in the expansion tray unit (large), check the position of the paper
feed adjusters (x2) as well.
Envelopes cannot be loaded in the expansion tray unit.
For paper of an irregular size (a custom size), adjust the position to the standard size that is closest to the actual
size.
Paper size
Position of the paper feed
adjuster
5
While pressing on the center of the metal plate, align the left and right paper feed adjusters.
A3, A4, B4, Envelope
Rear side of the paper cassette
- 88 -
Basic operations
A5, B5 or smaller
Front side of the paper cassette