Oki COREFIDO B822dn User Manual page 375

Message
The toner cartridge is not installed
properly
Please reinstall the toner cartridge
Press Help for details
The fuser is not
installed properly
Press Help for details
Cover Name Open
Press Help for details
Paper jam occurred
Paper jam Number place(s)
Remove the paper
Press ▼ to locate jam
Press Help for details
Paper jam occurred
Paper jam Number place(s)
Remove the paper
Press ▼ to locate jam
Press Help for details
Paper jam occurred
Paper jam Number place(s)
Remove the paper
Press ▼ to locate jam
Press Help for details
Language Change Failed
Error num:Code
Power Off and Wait for a while
nnn:Condensing Error
Service call
nnn:Error
Service call
nnn:Error
Service call
nnn:Error nnn
Service call
nnn:Error
Service call
nnn:Error
Power Off and Wait for a while
nnn:Thermal Error
Error code
547 The toner cartridge is not installed properly.
Check that the protective tape on the toner cartridge has been
peeled off.
If the error still persists, contact our Customer Service Center or
your dealer.
320 The fuser is not properly installed. Please reinstall the fuser.
To install the fuser, see
If the error persists, replace the fuser with a new one.
310, 311, 587 The indicated cover is open. Close the cover.
310: Output tray (Top cover)
311: Front cover
587: Rear cover
631, 632, 633, 634, A paper jam has occurred.
637, 638, 639, 641, Multiple sheets of paper remain inside this machine. When the
642, 652 scroll button on the operator panel is pressed, the lamp for the
place where paper is jammed blinks. Remove all the paper from
where the lamp blinks.
387, 390, 391, 392, A paper jam has occurred in the paper feed path from the
393, 394 displayed tray.
Remove the jammed paper.
If no paper is jammed, feeding has failed. Reduce the number
of paper loaded in the tray. Also, make sure that the paper
stopper position matches the paper size.
390: MP tray; 387, 391: Tray1; 392: Tray2; 363: Tray3; 394:
Tray4
370, 371, 372, 380, A paper jam has occurred.
381, 382 Multiple sheets of paper remain inside this machine. When the
scroll button on the operator panel is pressed, the lamp for the
place where paper is jammed blinks. Remove all the paper from
where the lamp blinks.
- Failed to change the display language on the display.
Restart this machine, and reset the language setting.
- Condensation has occurred inside this machine.
Turn off the power, and then turn the power back on after a
while.
If the same error appears, contact our Customer Service Center
or your dealer.
- An error has occurred inside this machine.
Please contact the Customer Service Center or your dealer.
- An error has occurred inside this machine.
Please contact the Customer Service Center or your dealer.
- An error has occurred inside this machine.
Please contact the Customer Service Center or your dealer.
- An error has occurred inside this machine.
Please contact the Customer Service Center or your dealer.
- An error has occurred inside this machine.
Please contact the Customer Service Center or your dealer.
- The temperature is high inside this machine.
Turn off the power, and then turn the power back on after a
while.
If the same error appears, contact our Customer Service Center
or your dealer.
- 375 -
Troubleshooting
Description
"Replacing the maintenance kit(P.328)".