Logging in as an administrator
To change settings of this machine from the web page, it is necessary to log in as an administrator.
1
Click [Login].
2
Input "admin" in [User Name] and the admin password of this machine in [Password], and then
click [Sign In].
Admin
Password(P.207)
When access control is enabled, you can log in as a local user with administrator privileges (with .AdminRole
assigned).
3
The following screen is displayed.
Changing admin password (Web page)
You can change the admin password of this machine from the web page. The admin password specified on the
web page is used to log into this machine or to change settings from the operator panel or web page.
The admin password can consist of 1 to 32 digits.
The following characters can be used for the admin password.
Upper-case letters
Lower-case letters
Digits
Symbols: [Space] ! " # $ % & ' ( ) * + , - . / : ; < = > ? @ [ ¥ ] ^ _ ` { | } ~
Be sure to write down the password you set just in case you forget.
If you forget the admin password, you cannot change [Admin Setup] or [Boot Menu].
To reset the admin password, the charged service by maintenance staff may be necessary.
- 214 -
Management of this machine