Oki COREFIDO B822dn User Manual page 83

Media type
Label A4
Letter
Partially printed Equivalent to plain paper
paper
Colored paper Equivalent to plain paper
Long paper Width: 210 ~ 297 mm
Length: 421 ~ 1,321 mm
Recommended paper
Media type
Plain Excellent paper A3 (Model name: PPR-DA3TDB)
Excellent paper A4 (Model name: PPR-DA4TDB)
Recycled Oji Paper Recycled PPC Paper 100
Label LBP-F7xxx series (Kokuyo) (Total weight: 0.1 - 0.2 mm)
 If the paper grain direction does not match the paper feeding direction, paper jams may occur.
 Printing from the MP Tray may cause wrinkles. In this case, feed paper from the paper cassette.
 The paper wrapper shows the orientation of the surface. Load paper properly so that the face side is the printing side.
 The paper is wrapped in moisture-proof paper to prevent moisture. Please use the paper as early as possible after
opening its package.
 Wrap unused paper in the wrapping paper, and keep it away from moisture absorption as much as possible.
 If it is used beyond the normal room temperature (temperature: 17°C to 25°C; humidity: 40% to 60%), the printing
quality may be degraded or problems may occur such as paper jams, wrinkles, curls, and warpage.
 Depending on the installation environment of the machine, printing on paper that contains moisture may cause white
steam or water droplets to appear around the paper exit area of the machine. This is not abnormal because the heat
generated when the toner is fixed to the paper evaporates the moisture contained in the paper.
Paper size
Total weight: 0.1 ~
0.2mm
For simplex printing:
60 ~ 220g/m
For duplex printing:
60 ~ 162g/m
For simplex printing:
60 ~ 220g/m
For duplex printing:
60 ~ 162g/m
128g/m
Paper weight
Labels for electrophotographic printers or
dry PPCs where the surface paper,
adhesive, and backing are not degraded
by heat.
Media with a structure that prevents the
front paper from peeling off from the
backing in the heat fixing process of the
printer.
Media with a structure that prevents the
front paper from peeling off the backing
when the paper is traveling.
Media with a combined weight of 0.1 to
0.2mm of front paper and backing.
Media whose surface paper covers the
entire backing sheet with no adhesive
sticking out.
Media with no breaks or creases.
Duplex printing is not available.
Media whose ink used for partial printing
2 is heat resistant and can withstand
230°C.
2
Media whose pigment or ink used to color
2 the paper is heat resistant and can
withstand 230°C.
2
Media made of electrophotographic
paper with the same features as plain
paper.
2
Name
- 83 -
Basic operations
Other conditions