Replacing The Maintenance Kit - Oki COREFIDO B822dn User Manual

Replacing the maintenance kit

The maintenance kit is a set of a fuser and a transfer roller. Follow the procedure below to replace the fuser
and transfer roller at the same time.
1
Prepare a new maintenance kit and check that you have all the parts.
2
Open the output tray by holding its center.
As the fuser may be hot, be cautious during operation and always hold the handle to lift it. When it is hot, wait until it
cools down before any operation.
3
Unlock the fuser by rotating the blue lock lever on the left side in the direction of the unlock mark
until it stops.
Fuser
Transfer roller
Burns may be caused.
- 328 -
Maintenance