Oki COREFIDO B822dn User Manual page 159

10
Press ▲ or ▼ to select [Labels], and then press «OK». Check that [*] is displayed to the left of
the selected setting.
11
Press «CANCEL» to return to the standby screen.
Printing from a PC
 If you are using B822, refer to the PCL printer driver section.
For Windows PCL printer driver
1
Open the file to be printed.
2
Select [Print] from the [File] menu.
3
Click [Detail Settings].
4
Select [A4] or [Letter] from [Size] in the [Setup] tab.
5
Select the tray where labels are loaded from [Source] in the [Setup] tab.
6
Make settings as follows in [Type].
If you selected [Labels] on the operator panel when you loaded labels in the machine, select [Printer
Settings] in [Type].
In other cases, select [Labels] in [Type].
7
If necessary, click [Paper Feed Options], check [Long Edge Feed] for the tray to feed paper, and
click [OK].
If you want to print while checking each sheet, click [Paper Feed Options] in [Setup] of the printer driver, and
check [Feed paper individually] (or select [Yes]). To print continuously, uncheck [Feed paper individually] (or
select [No]). For details, see
8
Specify other settings as necessary, and click [OK].
9
Click [Print] in the [Print] screen.
For the Windows PS printer driver
1
Open the file to be printed.
2
Select [Print] from the [File] menu.
3
Click [Advanced].
4
Click [Advanced] in the [Layout] tab, and select [A4] or [Letter] from [Paper Size].
5
Click [OK].
6
Select the tray where labels are loaded from [Paper Source] in the [Paper/Quality] tab.
"Printing one sheet at a time
- 159 -
manually(P.168)".
Printing from a PC