Oki COREFIDO B822dn User Manual page 35

7
Use a flat-head screwdriver to connect the left and right sides of the main unit and the expansion
tray unit with the supplied connecting parts.
When moving the machine or replacing consumables or maintenance parts, or loading paper in the tray, check
the following points to prevent the printer from tipping over.
 Do not press on the paper cassette from above when the paper cassette is pulled out.
 Do not press on the machine from the back when the paper cassette is pulled out.
8
Plug the power cord or any removed cables back to the main unit.
Connecting the power
9
Power on this machine.
10
Press the scroll button ▼ on the operator panel to select [Configuration], and press «OK».
11
Check that [Tray Count] is selected, and press «OK».
12
Check that the expansion tray unit you installed appears on the display.
13
After checking the display, press «CANCEL» to return to the standby screen.
14
After you have connected you PC and this machine and installed the software, set the expansion
tray unit in the printer driver.
Setting the printer
cord(P.41)
driver(P.74)
Preparing and connecting this machine to your PC
- 35 -