Setting Ieee802.1X (Wireless Lan) - Oki COREFIDO B822dn User Manual

5
Select [Enable] in [IEEE802.1X Authentication].
6
Select [PEAP] in [EAP Type].
7
Input the user name in [EAP User].
8
Input the password in [EAP Password].
9
Select [Authenticate Server] in [Server Authentication Implementation].
10
Click [Import] in [Import of CA Certificate].
11
Select the CA certificate file, and click [OPEN].
Specify the CA certificate used for RADIUS server authentication. PEM, DER and PKCS#7 files can be
imported.
12
Click [Apply].
13
When the machine is online, power off the machine.
14
Remove the LAN cable from the machine.
15
Connect the LAN cable to the network interface connector of this machine.
16
Connect the other end of the LAN cable to the authentication port of the authentication switch.
17
Power on this machine.
18
Set the IP address of this machine.

Setting IEEE802.1X (Wireless LAN)

You can set IEEE802.1X authentication with a wireless LAN. First, access the web page of this machine via a
wired LAN to set IEEE802.1X authentication, and then set the wireless connection on the web page.
Setting with EAP-TLS
1
Open the web page of this machine.
Opening the web
2
Log in as an administrator.
Logging in as an
3
Select [Network Setup].
4
Click the Menu button on the upper right corner, and then select [Security] - [IEEE802.1X
Authentication].
5
Select [Disable] in [IEEE802.1X Authentication].
6
Select [EAP-TLS] in [EAP Type].
7
Input the user name in [EAP User].
8
Select [Not use] in [Use server certificate (SSL/TLS certificate) in EAP authentication].
If you select [Use], the certificate must be preset in the [Communication Encryption (SSL/TLS Server Certificate)]
menu.
Communication encryption
9
Input the password in [Import of Client Certificate].
page(P.213)
administrator(P.214)
(SSL/TLS)(P.216)
- 224 -
Management of this machine