Table of Contents
Advertisement
obal Contract
rano Chair Disassembly
LICENCE INSTALLATION
viceversa®
bly
Required Tools:
Note: Chair can be disassembled in 5 minutes or less
Leg attachment to surface
STEP 1: Place the worksurface on the floor upside down.
IMPORTANT:
Ensure there are no foreign items on the floor that could damage the finish of the
surface. It is recommended the installation of the legs be done on either a padded
blanket or cardboard.
STEP 2: Position the appropriate leg(s) over the 4 metal inserts located in the work-
surface, and attach with supplied bolts. Use 2 wood screws (1"x#10) to lock each leg
into position.
STEP 3: Once all legs are attached securely, invert the completed unit, locate it accord-
ing to the installation plan.
STEP 4: The unit can now be leveled. There are nine holes on each leg for the purpose
of adjusting the height of the unit. The holes are located at 1" increments.
Note: Chair can be disassembled in 5 minutes or less
STEP 5 For fine-tuning of leveling, simply turn the leveling glide on the bottom of the
leg, or caster, until level is accomplished.
STEP 6: To change the leveling glide to a caster, or locking caster, remove the existing
te: Chair can be disassembled in 5 minutes or less
casting by threading it all the way out of the leg. Screw in the desired product, and
level as above.
5 minutes or less
3
79
CANADA
Required Tools:
Safety Glasses
Required Tools
Safety Glasses
Rubber Mallet
Safety Glasses
Rubber Mallet
Flathead Screw
Allenkeys
driver
Flathead Screw
Actuator
driver
Pliers
Actuator
10 mm Hex Bit
Pliers
Phillips Bit
10 mm Hex Bit
T-25 Torx Bit
Phillips Bit
Bit Adaptor /
T-25 Torx Bit
Handle
Bit Adaptor /
Socket Wrench
Handle
Socket Wrench
13 mm Socket
Adaptor
13 mm Socket
Adaptor
VERSION 2 03/18/10
4
Safety Glasses
Phillips Bit
Rubber Mallet
T-25 Torx Bit
Rubber Mallet
Screwdriver
Flathead Screw
Bit Adaptor /
driver
Handle
Actuator
Socket Wrench
Nylon Block
Pliers
13 mm Socket
Adaptor
10 mm Hex Bit
VERSION 2 03/18/10
Phillips Bit
T-25 Torx Bit
1
Bit Adaptor /
Handle
Socket Wrench
13 mm Socket
Adaptor
VERSION 2 03/18/10
VERSION 2 03/18/10
5
Metal Pick
2
6
globalfurnituregroup.com
Advertisement
Table of Contents
