Global Licence 2 Installation Manual page 83

LICENCE INSTALLATION
WIre Management with Boulevard
Viceversa tables can manage wires externally routed to and from our Boulevard panel
system.
1
STEP 1: With the tables adjacent to boulevard panels, power and communication can exit
the Boulevard raceway directly into the horizontal wire management tray terminating at
any location atop the worksurface.
Modesty Panel
Viceversa tables can manage wires externally routed to and from our Boulevard panel
system.
STEP 1: Place the top on the floor upside sown.
NOTE: Ensure there are no foreign items on the floor that could damage the finish of the
surface. It is recommended the top be places on either a padded blanket or cardboard.
STEP 2: Remove the wire management covers from the legs.
STEP 3: Place side flanges of the modesty panel into the cavity of each leg and slide the
top of the modesty panel to the underside of the worksurface. (The modesty panel should
be oriented so that the screws are on the inside or towards the user.
STEP 4: Drive the supplied screws through the holes in the modesty panel.
STEP 5: Shorten and replace the wire management covers onto the legs.
NOTE: When ganging two tops by sharing the legs, the metal modesty panel can not be
used.
When ganging two tops with metal modesty panel, specify two flat brackets per join.
CANADA 82
globalfurnituregroup.com