Table of Contents
Advertisement
Kadin Tables
1/4 -20- 0.5 Screw
Note: First assemble the depth, then assemble the width of the table.
Start at one end of the table and work your way through to the other end
STEP 1: Insert the slider into the groove. Align the slider's hole with the diecast
support's hole (Or plastic support's Hole) and secure them together with the
provided screw.
STEP 1b:Plastic supports are to be used at the seams between two adjoining
table tops.
STEP 2: Attach the legs to either side of the beam with the provided screws.
STEP 3: Once one side is complete, attach the remaining beams to the as-
sembly and add the provided diecast supports (tables up to 48" will not include
diecast supports).
STEP 4: Each top will include metal inserts - connect the legs and supports to
the top with the provided machine screws.
globalfurnituregroup.com
Required Tools
Safety Glasses
Allenkey 3/16"
Included Hardware
2 Way Connector
3 Way Connector
Note: Chair can be disassembled in 5 minutes or less
Plastic Support
Diecast Support
1b
LICENCE INSTALLATION
Bit Adaptor /
Handle
Socket Wrench
Rubber Mallet
Drill
13 mm Socket
Adaptor
2 Way Connector 60 Degree
Beam
Leg
Slider
1
1
1b
VERSION 2 03/18/10
CANADA
72
Advertisement
Table of Contents
