Global Licence 2 Installation Manual page 4

LICENCE INSTALLATION
Assembly Hardware - Hinges
Hinge & Mounting Plate with Euro Screws
• The hinge is a tool-free attachment of hinge to door.
• Individual components and fittings do not need to be assembled until they reach
their final destination.
• The mounting plate with Euro screws is easy to install.
• The spring loaded clip makes a simple connection between the door and the end
panel or divider.
Steps to install hinges:
STEP 1: Install all mounting plates using the predrilled holes of end panel and/or
dividers by fastening with the Euro screws.
Note: The mounting plate should be oriented with the arrow pointing towards
exterior of the unit.
STEP 2: Place the door face down. With the lever open press hinge into the pre-
drilled holes. Press the lever on the hinge down with your thumb. By closing the
lever, the hinge is held firmly in place.
STEP 3: Align hinges to mounting plates and push in until a click is heard.
STEP 4: Use adjusting screws on the hinge to level the door.
Assembly Hardware For Storage Components - Titus Connectors
STEP 1: Press the cam into the faceboard.
STEP 2: Insert the dowel into the side panel.
STEP 3: Assemble the panels.
STEP 4: Tighten the cam to lock the dowel.
STEP 5: Assemble the panels.
1
START MIN MAX
LOCK
4
3 CANADA
Depth Adjustment
4
Universal Cam
2
5
Assembly
1
Removal
3
Height Adjustment
Quickfit - TL Dowel
3
2
Side Adjustment
globalfurnituregroup.com