Wall Mount Storage - Global Licence 2 Installation Manual

LICENCE INSTALLATION

Wall Mount Storage

Licence wall mount overheads are shipped fully assembled.
STEP 1: Placement on a wall, insure that the wall has load bearing capability.
Hardware to attach to a wall is not provided as different hardware is required for Installed on the overhead
different types of walls. In ALL cases, it is important to use fastening hardware
1
suitable for the load and the type of wall.
STEP 2: Wall mount bracket is 2 laminate boards cut with 45 degree angle at
2
top so that when placed together they will fully engage. Bottom board will be
mounted to the wall with "high" side facing out from the wall.
STEP 3: Once mounted and secured, the overhead can be placed on the wall en- Front away from wall
gaging wall mount hardware. On the inside of the cabinet, drive a screw though
the back wall of the overhead into the wall mounted laminate strip to full secure.
3
85 CANADA
globalfurnituregroup.com