Table of Contents
Advertisement
LICENCE INSTALLATION
y
Flip Top Tables
Required Tools:
Pre Assembled Components
Legs
Cross Beam
Note: Chair can be disassembled in 5 minutes or less
Legs
1. Connect the leg to cross beam using the locking washer.
ed in 5 minutes or less
minutes or less
2. Snap on black plastic cover to
conceal connection.
75
CANADA
Actuator
Pliers
Required Tools
Safety Glasses
Safety Glasses
10 mm Hex Bit
Rubber Mallet
Allenkeys
Phillips Bit
Flathead Screw
driver
T-25 Torx Bit
Cable Release/Support Beams
Actuator
Bit Adaptor /
Handle
Pliers
10 mm Hex Bit
Socket Wrench
Phillips Bit
T-25 Torx Bit
13 mm Socket
Adaptor
Bit Adaptor /
Handle
Socket Wrench
13 mm Socket
Adaptor
3. Snap support block into channel
on top of cross beam.
VERSION 2 03/18/10
Phillips Bit
T-25 Torx Bit
Drill
Measuring Tape
Bit Adaptor /
Handle
Socket Wrench
Phillips Bit
Spacer Block
13 mm Socket
Adaptor
Note: Chair can be disassembled in 5 minutes or less
VERSION 2 03/18/10
Wrench
3 9/16" x 1 7/8" (included)
VERSION 2 03/18/10
globalfurnituregroup.com
Advertisement
Table of Contents
