Table of Contents
Advertisement
L2TCDxxxxxx
NOTE: Open and assemble only one product
at a time to avoid a potential mix-up of parts
and hardware.
It is adviseable to assemble the unit on a
carpet to avoid scratches.
Assembly
STEP 1: Unpack and inspect individual pieces for damages or missing hardware.
STEP 2: Pick a clean unobstructed area to assemble desk. This unit is best to as-
semble upside down.
STEP 3: Place worksurface face down on clean unobstructed area.
STEP 4: Place monoleg(s) as per product evenly spaced leaving overhang based on
shape of worksurface top. Using #8x 3/4 wood screws to secure to the bottom of the
surface.
STEP 5: This product is shipped with "HAT" channel support bar, install along the
bottom of the surface.
Note: Please allow room to install a keyboard tray at the users edge if needed.
STEP 6: This product is intended to gang to existing assembly. Using flat brackets,
install with #8x 3/4 wood screws.
Installation For Similar Products
L2TCRxxxx
L2TCAxxxxL
globalfurnituregroup.com
Required Tools
Safety Glasses
Screwdriver #2 Robertson
Included Hardware
Flat Bracket
Wood Screw #8 3/4
L005650025
L007250032
L2TCPxxxxR
LICENCE INSTALLATION
WORKSURFACE
HAT CHANNEL
L2TCWxxxxxxL/R
Left Hand Shown
MONOLEG
BHML03 (default)
or
LLSQ3X3H28
CANADA
60
Advertisement
Table of Contents
