Table of Contents
Advertisement
L2TDHxxxxxx
NOTE: Open and assemble only one product
at a time to avoid a potential mix-up of parts
and hardware.
It is adviseable to assemble the unit on a
carpet to avoid scratches.
Assembly
STEP 1: Unpack and inspect individual pieces for damages or missing hardware.
STEP 2: Pick a clean unobstructed area to assemble desk. This unit is best to as-
semble upside down.
STEP 3: Orient Gable with Pre-drilled Holes facing underside of the desk assembly.
a. Install levellers into T Nut inserts on the bottom of the gable.
b. Install Blum Connector screws into pre-drilled holes on the top edge of
the gable.
c. Based on the application, see drawing for positioning, install Modular
connector screws in the top two pre-drilled hole positions.
STEP 4: Half modesty. The half modesty will have modular connectors pre-installed
on each end.
a. Connect half modesty to the full gable by lining up modular connectors
with modular screws and slide half gable down, you can use a mallet to
securely seat the half gable into position.
b. Install 2 shoulder screws into pre-drilled holes on the side on the monoleg.
Connect half modesty to the monoleg by lining up modular connectors with
modular screws and slide half modesty down, you can use a mallet to
securely seat the half gable into position.
c. Screw monoleg to the worksurface using #8x3/4 wood screws provided
Installation For Similar Products
L2TAHxxxx
L2TPHxxxxL
L2TEDHxxxxxxL
L2TEDHxxxxxxR
globalfurnituregroup.com
Required Tools
Safety Glasses
Screwdriver #2 Phillips
Included Hardware
Blum Connector
Blum Connector
Screw L005650060
(installed) L005650061
Modular Connector
(installed) L004250001
Modular Screw
L007250001
L2TPHxxxxR
L2TEDHCOxxxxxxR
LICENCE INSTALLATION
Screwdriver #2 Robertson
Leveler
L007240005
Wood Screw #8 3/4
L007250032
STEP 5: Turn Assembly upright.
STEP 6: This product is intended to be ganged to adjoin surface. Using flat brackets,
secure with #8x3/4 wood screws to attach underside of surface to join assemblies.
WORKSURFACE
GABLE
HALF MODESTY
L2THHxxxxxxL
L2THHxxxxxxR
L2TEDHCOxxxxxxL
Rubber Mallet
"T" Nut Insert
Flat Bracket
L007250039
L005650025
MONOLEG
L2BHML03 (default)
or
L2LSQ3X3
CANADA
56
Advertisement
Table of Contents
