Set Output Color On Signal Loss; Enable Deinterlacing; Figure 4-7 : Set Output Color On Signal Loss; Figure 4-8 : Enable Deinterlacing - evertz 2432RX2-HDMI User Manual

4.2.3.3. Set Output Color on Signal Loss

This menu allows the user to set the output color when the signal is loss.
1. Grey (outputs grey when no input signal is detected)
2. Black (outputs Black when no input signal is detected)
3. Green (outputs Green when no input signal is detected)
4. Disable (No color)

4.2.3.4. Enable Deinterlacing

This menu allows the user to turn the deinterlacer on or off on a per channel basis. When deinterlacer is
on the 2432RX2-HDMI will output a progressive signal, when deinterlacer is off the 2432RX2-HDMI will
output an interlaced signal.
1. Enable (will be prompted for input 1 or 2)
2. Disable (will be prompted for input 1 or 2)
UPGRADING FIRMWARE

Figure 4-7 : Set Output Color on Signal Loss

Figure 4-8 : Enable Deinterlacing

Revision 1.0
Dual Path Serial Digital to HDMI Converter
2432RX2-HDMI
Page - 15