Table of Contents
Advertisement
HD9690 Series HDTV Graticule Generator Manual
The menu choice that is shown for an item when you press the SETUP key or turn
the left shaft encoder knob will be saved as the new value for that menu item. If
you do not wish to save a new value press the ESC key to exit the SETUP menu.
When you have made all the desired changes, press the ESC key to return to the normal display mode.
After a 30-second timeout, the Graticule Generator exits from the SETUP menu automatically.
Each of the menu items is described in the sections below, with an explanation of what each choice does.
When you make a change to one of the SETUP parameters you will need to press
the SETUP button or turn the left shaft encoder knob to save the change.
3.2.1. Choosing the Raster limits for the Mask Aspect Ratio and Size Calculation
Mask apert =
prod
This menu item sets how the aspect ratio and size calculations for the mask and grid objects are
calculated. In either setting, the mask and grid objects can be positioned all the way out to the production
aperture. When you choose one of the automatic aspect ratios for the mask object, its initial size and
position will be calculated with respect to the mask aperture setting. See section 3.5.2.1 for information on
selecting the mask aspect ratio.
Select prod when you want to use the production aperture as the reference for the mask and grid object
aspect ratio and size.
Select clean when you want to use the clean aperture as the reference for the mask and grid object
aspect ratio and size.
3.2.2. Choosing the Raster limits for the Box Size Calculation
Box % apert=
prod
This menu item sets how the size percentage calculations for the box object are calculated. In either
setting, the box object perimeter can be positioned all the way out to the production aperture.
Select prod when you want to use the production aperture as the reference for the box object size
calculation.
Select clean when you want to use the clean aperture as the reference for the box object size calculation.
3.2.3. Choosing the Object Blink Time
Obj blink =
short
This menu item sets how long objects blink when they are selected.
Page 3-6
clean
clean
long
none
Revision 1.5
FRONT PANEL OPERATION
Advertisement
Table of Contents
