Alter Port Permission Maps - evertz 8084 Instruction Manual

SERIAL PROTOCOL
Models 8084/8084AD/8085 Closed Caption Encoder Manual
PORT A: CF1 CF2 TF1 TF2 XDS
PORT B: CF1 CF2 TF1 TF2 XDS
PORT C: CF1 CF2 TF1 TF2 XDS
PORT D: CF1 CF2 TF1 TF2 XDS OFFLINE
This example shows all ports are permitted access to all data types (the
factory default setting) and the Port D modem is offline.
Permission Map
PORT A: CF2 TF1 TF2 XDS
PORT B: CF1 TF1 TF2 XDS
PORT C: CF1 CF2
PORT D: CF1 CF2 TF1 TF2
This example shows port A is denied access to captions in field 1, port B is
denied access to captions in field 2, port C is denied access to text in field
1 and port D is online and is denied access to extended data services.

4.7.2 Alter Port Permission Maps

This command will alter the permission map for any port by adding or
subtracting various data types.
Command: ^AQ<sp>pn<sp>-dt...dt...dt<cr>
Default: none
Example:
^AQ PB – XDS –TF2 –CF2 CF1 TF1<cr>
^AQ CF1<cr>
^Au<cr>
^AQ PD – XDS –TF2 –CF2 –TF1 CF1<cr>
^AQ PB –XDS –TF2 –CF2 -CF1 TF1<cr>
^AQ PC –TF2 –CF2 -CF1 -TF1 XDS<cr>
Revision 1.6.6
TF2 XDS
ONLINE
This command will disallow Port B
from all field 2 data types, and
enable Port B for captions and text
in field 1.
This command will allow the current
port to access captions in field 1.
Permissions for other data types
remain as previously set.
These commands show a typical
application which places the 8084 in
stream mode, allows modem Port D
to process captions in Field 1,
allows Port B to process text articles
in field 1, and enables Port C for
extended data services.
Page 4-24