Table of Contents
Advertisement
9 pin D
Sig Gnd
Frame Gnd
Figure 2-9: Cable to Connect 9025TR to PC Communications Port
In applications where you are making a standard definition work copy at the same time as the high
definition master, you will also need to connect the HQ9150 or HD9150 HD Afterburner to the PC using a
similar cable. The preferred method of doing this is to connect each hardware device to a different COM
port on the PC as shown in Figure 2-10. Using this method, the K
automatically switch the communications to the appropriate hardware device.
If your PC needs to have additional com ports added, make sure that they are
configured so that each com port has its own interrupt.
Figure 2-10: Connecting KeyLog Tracker to 9025TR and HD9150 using 2 COM Ports
2.8.2. Installing K
L
EY
Insert the KeyLog TRACKER™ CD-ROM into the PC's CD-ROM drive and click on the Start button and
then click Settings. Click on the Control Panel, then Add/Remove Programs. The K
installation program will guide you through the installation procedure.
Once the installation is complete, click on the Start button and then click Programs. Select the "Evertz"
program group and click on the KeyLog TRACKER™ icon.
You are presented with the K
as a user name, leave the password area blank and click the "OK" button.
You are then presented with the "Devices" tab of the Options dialog box that prompts you to select the
hardware devices you wish to control and configure the Communications ports on the computer.
INSTALLATION
9025TR End
Pin
Male
TxD
2
RxD
3
5
----drain-----
7
8
4
6
9
Shield
----drain-----
HDSD9025
HD9150
TRACKER™
OG
L
TRACKER™ Splash screen and the "Login" dialog box. Enter "user"
EY
OG
9025TR Series Film Footage Encoders Manual
Computer End
Belden
Pin
9501
2
3
5
7
8
4
1
6
9
Shield
KeyLog Tracker
Revision 1.3
9 pin D
Female
RxD
TxD
Sig Gnd
RTS
CTS
DTR
DCD
DSR
RI
Frame Gnd
L
TRACKER™ software can
EY
OG
L
EY
OG
TRACKER™
Page 2-14
Advertisement
Table of Contents
