evertz 8084 Instruction Manual page 59

>PORT A BAUD
BaudA=1200
BaudA=2400
BaudA=4800
BaudA=9600
BaudA=19200
BaudA=38400
>PORT D BAUD
BaudD=1200
BaudD=2400
BaudD=4800
BaudD=9600
BaudD=auto
>PORT A WORD
WordA 7 odd
WordA 7 even
WordA 8 none
WordA 8 odd
WordA 8 even
OPERATION
Models 8084/8084AD/8085 Closed Caption Encoder Manual
PORT A BAUD is used to set the baud rate of the communications
port A (similar menu items are available to configure the baud
rates for ports B and C). Adjust this setting to match the baud
rate of your computer. If unsure what the baud rate is set it to
1200 baud (the factory default setting).
PORT D BAUD is used to set the baud rate of the built-in modem -
port D. (Similar menu items are available to configure the baud
rates for the optional modem - port E). Adjust this setting to
match the baud rate of your computer. The modem will connect
at the specified baud rate. When auto baud rate is selected, the
modem will connect at any baud rate up to 14,400. You may
want to choose a specific lower baud rate if your software does
not properly respond to flow control and you are experiencing
buffer overflow errors. If unsure what the baud rate is, set it to
auto baud.
PORT A WORD is used to select the number of data bits and parity of
the communications port A. (similar menu items are available to
configure the data format for ports B, C, D and optional modem
port E).
Select WordA 7 odd for 7 data bits, 1 stop bit odd parity.
Select WordA 7 even for 7 data bits, 1 stop bit even parity.
Select WordA 8 none for 8 data bits, 1 stop bit no parity.
Select WordA 8 odd for 8 data bits, 1 stop bit odd parity.
Select WordA 8 even for 8 data bits, 1 stop bit even parity.
Revision 1.6.6
Page 3-17