evertz 8084 Instruction Manual page 143

Toolbar
Icon Name
Set Clock
Sync MetaCast and
Encoder
Options
B.5.3 Setting the 8084AD Date from MetaCast 2
If your LTC input to the 8084AD contains date information you can go straight to section B.5.4,
otherwise you will have to set the date in the 8084AD from MetaCast 2. To do this you will need to
temporarily set the Time Source to PC Clock. Check the PC Clock's settings by clicking the 'Set Time'
button on the Clock page toolbar. The Date/Time Properties screen will appear.
APPLICATION NOTE 3
Models 8084/8084AD/8085 Closed Caption Encoder Manual
Open up the Date/Time Properties window so that you can edit
the Date, Time and Time Zone. If your clock source is the PC,
this button will open the standard dialog used to set the PC
clock.
If you are connected to a Caption Encoder, this button will
ensure that MetaCast 2 is synchronized with the 8084AD
Encoder. If your clock source is the Encoder, MetaCast 2 will
update its own clock; otherwise MetaCast 2 will update the
clock in the Encoder.
Shortcut to the General Options page when you can set various
clock parameters.
Revision 1.6.6
Description
AN3-7