Faults Tab; Faults Tab; Figure 9-5: Faults Tab In Encode Mode; Misc Control Tab - evertz 7772MFX-HD Manual

Parameter
Headphone Source
Headphone Volume
Factory Reset Audio Control
Factory Reset All
SD Bypass Mode
9.2.5. VistaLINK

FAULTS TAB

®
Parameter
Genlock Presence
Input Video Presence
7772MFX-HD JPEG2000 SD & HD Encoder and Decoder
Description
This control enables the user to select the source for headphone
monitoring.
This control enables the user to adjust the headphone volume.
This control applies Factory Reset Audio Control function.
This control applies the Factory Reset All function.
In SD bypass mode, bypass path locks to input or genlock, the default
should lock to genlock. If AES embedding is required in SD-SDI
bypass, SD Bypass Mode should be set to genlock, HD to SD
switching is a bit slower in this mode. If fast HD to SD, or SD to HD
switching is required, SD Bypass Mode should be set to input and SD-
SDI input must be genlocked to the same source as 7772MFX-HD,
however AES audio embedding is not supported.
Table 9-4: VistaLINK
®

Figure 9-5: Faults Tab in Encode Mode

Description
Indicates genlock presence.
Indicates video presence.
Table 9-5: VistaLINK
Revision 1.2
7700 MultiFrame Manual

Misc Control Tab

Faults Tab

®
7772MFX-HD - 41