7.2.1. Setting the Vertical Phase
Video Control
VDLY
0 to Max
0
7.2.2. Setting the Horizontal Phase
Video Control
HDLY
0 to Max
0
7.2.3. Setting the Frame Phase
Video Control
FDLY
0 to Max
0
7772MFX-HD JPEG2000 SD & HD Encoder and Decoder
This control selects the vertical delay of the output video signal in
respect to the input video.
operating (output) video standard of the module.
For the following standards, the maximum delay is 1124: 1080i/50 and
1080i/59.
For the following standards, the maximum delay is 749: 720p/50 and
720p/59.
When the frame phase is set to 0, the vertical phase has a minimal
value of 25.
This control selects the horizontal delay of the output video signal in
respect to the input video.
The maximum possible delay is dependent on the operating (output)
video standard.
For the following standards, the maximum horizontal Phase delay is
2639: 1080i/50
For the following standards, the maximum horizontal Phase delay is
2199: 1080i/59.94
For the following standards, the maximum horizontal Phase delay is
1649: 720p/59.94
For the 720p/50 standard, the maximum delay is 1979.
This control selects the frame delay of the output video signal in
respect to the input video.
The default value should be 0.
Depending on the operating video standard, the value mappings are:
•
Interlace video: 0,1,2,...,12
•
Progressive video: 0,2,4...,24
If the vertical phase is set to less than 25, the 0 value cannot be set
here.
Revision 1.2
7700 MultiFrame Manual
The range of values is based on the
7772MFX-HD - 23