Table of Contents
Advertisement
7.6.4. Checking FPGA 3 Revision
Status
F3RV
Eg. "9"
7.6.5. Checking the Input Video Standard
Status
IVSD
Eg. "NTSC"
7.6.6. Checking the Output Video Standard
Status
OVSD
Eg. "1I59"
7.7.
CONFIGURING MISCELLANEOUS PARAMETERS
The Miscellaneous menu is used to configure miscellaneous parameters to enable VistaLINK
display orientation, and to perform a factory reset. The chart below shows the items available in the
Closed Captioning menu.
parameters.
VLNK
VistaLINK
Control Enable
®
DISP
Display Orientation
FRST
Factory Resets
Decoder or Encoder
IMGS
Reprogram
7772MFX-HD JPEG2000 SD & HD Encoder and Decoder
The status parameter will report the revision of FPGA 3 (audio sub-board)
on the module.
The status parameter will report the input video standard.
525i59(NTSC) --------------"NTSC"
625i50(PAL-B) --------------"PALB"
The status parameter will report the output video standard.
None ----------------------- "NONE"
625i50(PAL-B) ------------ "PALB"
525i59(NTSC) -------------"NTSC"
DVB ASI -------------------- "DVBA"
1080i50 ---------------------- "1I50"
1080i59 ---------------------- "1I59"
720p50 ----------------------- "7P50"
720p59 ----------------------- "7P59"
Sections 7.7.1 to 7.7.4 provide detailed information about each of the
Enables the ability to control the module through VistaLINK
Sets the orientation of the card edge dot matrix display.
Resets various components of the module to their factory
settings.
Switches the decoder and encoder mode.
Revision 1.2
7700 MultiFrame Manual
7772MFX-HD - 29
control,
®
®.
Advertisement
Table of Contents
