General Tab - evertz 7772MFX-HD Manual

7700 MultiFrame Manual
7772MFX-HD JPEG2000 SD & HD Encoder and Decoder
Parameter
Vistalink Enable
FPGA 1 Revision
FPGA 2 Revision
FPGA 3 Revision
Firmware Revision
Input Video Standard
Card Type
Switch Image Control
7772MFX-HD - 36
Description
This field indicates whether the 7772MFX-HD is under local control or
VistaLINK control.
®
This field displays the revision code of the main board FPGA.
This field displays the revision code of the JPEG2000 sub-board FPGA.
This field displays the revision code of the audio sub-board FPGA.
This field displays the firmware version string.
This field indicates the video standard of input signal.
This field identifies the Card Type parameter and it currently returns either
'7772MFX-HD in Encode' or '7772MFX-HD in Decode'.
This control enables the user to switch the card image between jpeg2000
encoder and decoder. Jumper J30 must be installed for the switch to be
successful.
NOTE: When this control is set successfully, the card will reboot and load
the newly switched to image.
Table 9-1: VistaLINK
Revision 1.2

General Tab

®