Table of Contents
Advertisement
7700 MultiFrame Manual
7772MFX-HD JPEG2000 SD & HD Encoder and Decoder
Note that Output 2 must be used when working with the ASI Output.
2.1.2. MFX-HD in Decode Mode
The BNC labeled INPUT in decode mode supports ASI and SD-SDI (for decompression or reclocked
bypass).
The BNC labeled OUTPUT1 in decode mode supports HD-SDI (decompressed) and SD-SDI (reclocked
bypass).
The BNC labeled OUTPUT2 in decode mode supports HD-SDI (decompressed), SD-SDI (reclocked
bypass) and ASI (reclocked bypass).
2.2.
AUDIO CONNECTIONS
The 7772MFX-HD has the ability to embed (MFX-HD in Encode Mode) and de-embed (MFX-HD in
Decode Mode) up to four AES groups of audio streams (16 channels). No compression is applied to the
AES audio streams. The audio source can be embedded audio on the HD video input or AES audio
connected to the DB15 connector labeled AES IN when in Encode mode. It can also be re-embedded on
the HD video output or output as AES audio via the DB-15 connector labeled AES OUT when in Decode
Mode. Selection of the audio source is completed via card edge or VistaLINK
Name
AES 2
AES 6
AES 5
AES 1
AES 8
AES 7
AES 4
AES 3
GND
The 7772MFX-HD module is shipped with two breakout cables for the DB-15 connector (Evertz Part #
WPAES8-BNCM-6F), which can be used to facilitate wiring the AES audio connections. The pin out of the
cables is shown in Table 2-2.
7772MFX-HD - 4
Description
Reserved for Future Use
Reserved for Future Use
Reserved for Future Use
Reserved for Future Use
Reserved for Future Use
Reserved for Future Use
AES IO 2 - Unbalanced
Reserved for Future Use
AES IO 6 – Unbalanced
AES IO 5 – Unbalanced
AES IO 1 - Unbalanced
AES IO 8 – Unbalanced
AES IO 7 – Unbalanced
AES IO 4- Unbalanced
AES IO 3- Unbalanced
Ground
Table 2-1: AES INPUT/OUTPUT Audio Connector Pin Out
Revision 1.2
control.
®
DB-15 Pin
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Shell
Advertisement
Table of Contents
