Selecting The Source For The Headphone Monitoring; Displaying The Module Status; Checking The Module Firmware; Checking Fpga 1 Revision - evertz 7772MFX-HD Manual

6.4.2. Selecting the Source for the Headphone Monitoring

Headphone Monitor
HSRC
AES1
AES2
AES3
AES4
AES5
AES6
AES7
AES8
DMX Ch. 1 & 2
DMX Ch. 3 & 4
DMX Ch. 5 & 6
DMX Ch. 7 & 8
DMX Ch. 9 & 10
DMX Ch. 11 & 12
DMX Ch. 13 & 14
DMX Ch. 15 & 16
6.5.

DISPLAYING THE MODULE STATUS

The Status menus are used to show the status of various parameters of the 7772MFX-HD.
below shows the items available in the Status menu. Sections 6.5.1 to 6.5.5 provide detailed information
about each of the menu items.
UPRV Module Firmware
F1RV FPGA1 Revision
F2RV FPGA2 Revision
F3RV FPGA3 Revision
IVSD Input Video Standard

6.5.1. Checking the Module Firmware

Status
UPRV
Ex. "V1.0 BUILD 100"

6.5.2. Checking FPGA 1 Revision

Status
F1RV
Ex. "7"
7772MFX-HD JPEG2000 SD & HD Encoder and Decoder
This selects the audio source for the headphone monitoring.
If the parameter is set to AES1 to AES8, then the headphone will
AES1
be monitoring the external discrete AES inputs.
AES2
AES3
If the parameter is set to DMX1 to DMX8, then the headphone will
AES4
be monitoring the incoming embedded audio.
AES5
AES6
AES7
AES8
DMX1
DMX2
DMX3
DMX4
DMX5
DMX6
DMX7
DMX8
Displays the firmware revision of the module.
Displays the FPGA revision of the module's main board.
Displays the FPGA revision of the module's J2K sub-board.
Displays the FPGA revision of the module's Audio sub-board.
Displays the detected input video standard.
The status parameter will report the firmware version that is operating on
the module.
The status parameter will report the revision of FPGA 1 (main board) on
the module.
Revision 1.2
7700 MultiFrame Manual
7772MFX-HD - 17
The chart