Vistalink Audio Output Tab; Figure 9-13: Audio Output Tab In Decode Mode - evertz 7772MFX-HD Manual

7700 MultiFrame Manual
7772MFX-HD JPEG2000 SD & HD Encoder and Decoder
9.3.8. VistaLINK AUDIO OUTPUT TAB
®
Parameter
Coarse Audio Delay
Fine Audio Delay
C-bit Control
SRC Mode
Embedder Group Enable
Audio Out
7772MFX-HD - 48

Figure 9-13: Audio Output Tab in Decode Mode

Description
Allows the user to adjust the coarse audio delay.
Allows the user to adjust the fine audio delay.
This control determines whether the c-bit is preserved or replaced.
Preserve: Preserve as many bits as possible, but always change to
professional 48kHz.
Replace: Replace all c-bits with static channel status message that
reads professional 48kHz.
This controls the mode of the sample rate converter.
This control determines whether the embedder group is enabled or not.
This control determines the audio output destination. The default setting
is embedded.
Table 9-10: VistaLINK
Revision 1.2
Audio Output Tab
®