7700 MultiFrame Manual
7772MFX-HD JPEG2000 SD & HD Encoder and Decoder
7.7.1. Enabling VistaLINK
Miscellaneous
VLNK
Enable
RMTE
Disable
LCAL
7.7.2. Setting Card Edge Display Orientation
Miscellaneous
DISP
Horizontal
HORZ
Vertical
VERT
7.7.3. Resetting the Module to its Factory Defaults
Miscellaneous
FRST
Reset All
Video Control Reset
Audio Control Reset
7.7.3.1.
Resetting the Module to Factory Settings
Resetting the module and its components to factory settings can be configured the same way. For the
sake of simplicity, only the reset menu for the Reset All function will be described.
Miscellaneous
FRST
ALL
Yes
YES
No
NO
7772MFX-HD - 30
Control of the Module
®
This control configures the VistaLINK
Select RMTE to enable VistaLINK
able to use VistaLINK
to the card edge controls.
Select LCAL to disable VistaLINK
only able to monitor and configure the module from the card edge
controls.
This control enables the user to select a horizontal or vertical orientation
for the displays to accommodate mounting the module in the 3RU or
1RU frames.
This control enables the user to reset the entire module or certain
functional blocks to its factory default condition.
ALL
Select ALL to reset the entire module to the factory settings.
VCR
ACR
Select VCR to reset the Video Control to factory settings only. All
the other module settings will remain the same.
Select ACR to reset the Audio Control to factory settings only. All
the other module settings will remain the same.
This control enables you to reset the entire module to the factory
settings.
Select YES to reset the module to the factory settings.
Select NO to not reset the module to factory settings.
Revision 1.2
control of the module.
®
control of the module. The user is
®
to monitor and configure the module in addition
®
control of the module. The user is
®