7700 MultiFrame Manual
7772MFX-HD JPEG2000 SD & HD Encoder and Decoder
6.
ENCODE CARD EDGE MENU SYSTEM
6.1.
TOP LEVEL ENCODE MENU STRUCTURE
Table 6-1 provides a brief description of the top-level menu tree that appears when you enter the card
edge menu system. Selecting one of these items will take you to the next menu level, which enables the
user to set the value of that parameter. The details of each of the menu items are described in sections
6.2 to 6.6.
ACTR
Audio Control
Transport Stream
TSCO
Control
HEAD
Headphone Monitor
STAT
Status
MISC
Miscellaneous
6.2.
CONFIGURING THE AUDIO CONTROLS
The Audio Control menus are used to configure the audio delay; the mode of the sample rate converter,
C-bit control, which embedded group to enable, and input audio source selection. The chart below shows
the items available in the Audio Control menus. Sections 6.2.1 to 6.2.4 provide detailed information about
each of the menu items.
SRC
SRC Mode
CBIT
C-Bit Control
Input source
SRCS
selection
7772MFX-HD - 12
Sets audio controls for the module such as: Sample Rate
Converter mode; C-bit control; the demux behavior with a loss of
video and input video source selection.
Controls the transport stream parameters, such as PID numbers
and program numbers.
Sets the headphone volume level and selects the source for
headphone monitoring.
Reports the status of the firmware, FPGA revisions, and
input/output video standards
Enables VistaLINK
and more.
Table 6-1: Top Level Menu Structure
Sets the audio sample rate converter mode.
Sets the AES channel status bit handling.
Sets the input source.
Table 6-2: Audio Controls Menu
Revision 1.2
, sets display orientation, performs factory reset
®